Product release

Firmware Release: Omnis E100 v7.6.12

Acre Security is pleased to announce the delivery release of Omnis E100 Firmware version 7.6.12 and LON app v62. The E100 firmware is to be used with LON app v61 or newer. The software can be downloaded from our Webshop under the Software-tab for both the E100 and E100-S. 

How to Upgrade

The following methods are available for upgrading units in the field.

E100 Firmware

1: Upgrade using SD-card - This method can be used to upgrade the E100/E100-S, but not the LON-board. See below for methods to upgrade the LON-board.

2: Upgrade using E100 Web Interface – This method can be used to upgrade the E100/E100-S, E200, and the LON-board. See below for more details.

LON-board Firmware

The LON app can be upgraded using one of the following methods.

1. Upgrade using USB LON-Module – This method can be used to upgrade the LON-board with an additional piece of 3rd party hardware (not sold by acre Security): U10 USB Network Interface – TP/FT-10 Channel.

2. LON-Board swap between E200 and E100 – This method can be used to upgrade the E100/E100-S’s LON-board without the use of a LON-module. For instructions, please see manual: A-100435-10_Omnis_Discovery_and_Web_Tool-EN-SV. 

What’s new?

The following changes have been implemented since the latest E100 release-version (7.6.11) up to version 7.6.12 and for the LON app (v61) up to version 62.

Please note: Downgrading to older versions will always require a factory reset. 

E100 v7.6.12

• Fix: Crash 1193 hours after startup (#11581).
• Fix: Clock/data and Wiegand polls stopping after 3.5 weeks of idle ports (#11573),
• Fix: Backbone slave alive messages stopping after ~600 hours

LON app v62

• Fix: E200 output states assumed to be off after reset causing off state sometimes not being applied

Related Products