Product release

Product Release: Omnis E100 Firmware 7.7.6

Acre Security is pleased to announce the delivery release of Omnis E100 Firmware version 7.7.6. The E100 firmware is to be used with LON app v61 or newer.

The software can be downloaded from our Products page, under the Software-tab for both the E100 and E100-S.   

What’s new?

The following changes have been implemented.

New Features

• Configurable system time via web interface (#2624)

Changes

• Display initial fault text as reader response for initial fault when setting the system 
• Display invalid function text as reader response when invalid control function code is entered
• Web interface user is now reminded to change password
• Updated third party components:
  • Linux: 5.4.301 -> 5.4.302
  • Dropbear: 2025.88 -> 2025.89
  • libxcrypt: 4.4.38 -> 4.5.2
  • PHP: 8.2.29 -> 8.2.30
  • libzlib: 1.3.1 -> 1.3.2
  • mbedTLS: 3.6.5 -> 3.6.6

Bug Fixes

• Reset of reader port e-fuse not working all boards (#2758)
• Alarm input change occurring at the same time as the system is set is ignored (#2594)
• No network info in web-UI when DHCP server isn't available
• Custom web interface certificate removed when firmware is upgraded
• No log when time is updated for backbone connected units (#2648)
• Door left in open state when door sensor is made passive (#2770)
• Anti pass-back relying on door sensor after it has been made passive (#2770)
• Aperio: Crash when garbage data is received (#2665)
• Aperio: Slow detection of hubs going offline (#2665)
• Aperio: Slow detection of restored tamper when a lock goes back to online (#2665)
• Inability to parse LON applications built with latest compiler version
• Door opener not possible to activate for unlocked doors (#2810)
• Door sensor awareness sometimes incorrect after passive state is changed 
• Door considered open after re-activating a door sensor that is in a tampered state
• Loss of 220V considered active after re-activating a power loss input that is in a tampered state
• No door sensor alarm in set state if door forced action isn't set to generate alarm
• Door opened during debounce timeout not triggering forced door alarm
• Door lock strike timer activated when E200 is downloading reader texts
• Door node input changes sometimes not registered
• Unstable system due to file descriptor conflict

How to Upgrade

The following methods are available for upgrading units in the field.

E100 Firmware

1: Upgrade using SD-card - This method can be used to upgrade the E100/E100-S, but not the LON-board. See below for methods to upgrade the LON-board.

2: Upgrade using E100 Web Interface – This method can be used to upgrade the E100/E100-S, E200, and the LON-board. See below for more details.

LON-board Firmware

The LON app can be upgraded using one of the following methods.

1. Upgrade using USB LON-Module – This method can be used to upgrade the LON-board with an additional piece of 3rd party hardware (not sold by acre Security): U10 USB Network Interface – TP/FT-10 Channel.

2. LON-Board swap between E200 and E100 – This method can be used to upgrade the E100/E100-S’s LON-board without the use of a LON-module. For instructions, please see manual: A-100435-10_Omnis_Discovery_and_Web_Tool-EN-SV. 

Related Products